Ball Valves with unresticted flow
Ball valves or nickel-lated brass with a chomium-plated ball. Seals fo Teflon (PTFE and NBR). Metal lever (alu alloy). Straight-through opening same as port size.
Compact Ball Valves
Ball valves of nickel-plated brass with a chromium-plated ball. Seals of Teflon (PTFE and NBR). Metal lever (alu alloy). Straight-through opening same as port size.
Ball Valves with DVGW-Approval (EN 331)
Ball Valves of nickel-plated brass with a chromium-plated ball. Seals of Teflon (PTFE and NBR). Metal lever (steel). Straight-through opening same as port size.
Small-Size Ball Valves
Ball valves of nickel-plated brass with a chromium-plated ball. Metal lever or plastic lever. Straight-through opening smaller than port size.
Shut-Off and Regulating Valves
Shut-off valves are 2-way valves with manual operation. The seal is carried out by a stainless steel ball. Spindle seal is made by an o-ring of perbunan.
Needle regulating valves seal by means of a stainless steel cone, thus allowing continuous regulation between »on« and »off« (open and closed).
Drain valves of brass, straight or elbow-type, originally served to let out the condensation at the lowest point of compression tank. Today they are generally used for air exhaust. Soft seal (NBR) with handwheel, metal seal equipped with toggle.
Air distributors make it possible to have two or three taps that can be shut off individually. They are constructed either of hot-pressed brass with two outlets or of fittings that have two or three diaphragm shut-off valves. (See also air distributors with couplings).
Manual Slide Valves (2/3-Way Valves)
Manual slide valves are ideal fittings for equipment which, when turned off, must as a safety measure also be relieved; for example, putty-applicators, clamp-cylinders, naildrivers, grinders, drills, screw drivers etc.
When the compressed air pressure is escaped accidental operation cannot cause any injuries or damage. The manual slide valves can be connected to the compressed air system with 2/3 hose connectors or quick detachable connectors for plastic hoses. The desired individual parts can be found in the catalogue.
3 ways 2 switch-positions, operation by axial movement of the slide.
Protective device: The slide is elongated on the outer side in order to prevent the fingers from getting caught during operation.
Safe relieving of compressed air: Compressed air that escapes during exhaust is directed safely in axial direction.
Non-return valves allow flow in one direction while shutting off the flow in the opposite direction. They have a soft seal (Viton) and are available in straight or T-form.